Networks & Security — Manchester & North West

CCTV, networking & access control, built on UniFi.

Ventra Projects designs, supplies and installs UniFi camera, network and door access systems for homes, HMOs and small commercial sites, from a single consultation through to a fully configured system.

Platform

UniFi

Services

CCTV, networking & access control

Coverage

Manchester & North West

Person working from home on a laptop at the kitchen table
Working From Home

WiFi that covers the whole house, not just the hallway.

Working from home only works if the WiFi does too. The router your internet supplier gave you is built to get you online, not to cover every floor, every device and every video call at once. Add a few smart devices, a couple of laptops and a TV streaming in the next room, and it starts to show.

A properly designed network fixes that, with dedicated access points placed for your actual layout rather than wherever the cable happened to land, so signal stays strong from the home office to the kitchen to the spare room.

Before You Start

Four things worth thinking about

Most jobs come down to a mix of these. Knowing roughly what you need before we visit helps us scope the right system from day one.

VP / N&S / 02

01

WiFi

Full-strength wireless coverage in every room, with no dead spots between floors or behind thick walls.

02

Wired devices

Switches and structured cabling for anything that needs a stable, always-on connection.

03

CCTV systems

Cameras covering entrances, driveways and communal areas, recorded and reviewable from one app.

04

Security & access

Keyless door entry, fob or app-based access, and a log of who came and went.

Why Design Matters

One access point in the wrong place changes everything.

These are real coverage heatmaps from the same property. Green is strong signal, yellow is weak and red is barely usable. The difference isn't the building, it's the network behind it: a standard supplier router left wherever the cable lands, versus a system designed for the whole house.

VP / N&S / 03

Ground floor

Designed install Ground floor heatmap with the access point correctly placed, showing strong green signal across the whole floor
This floor's access point is sized and placed for the space it serves, with capacity to spare even when every device in the house is connected at once.
Unplanned install Ground floor heatmap with the access point poorly placed, showing a small area of green signal and a long, inefficient cable run
Everything on this floor still relies on the same underpowered router in the corner it landed in. Add a few more phones, laptops or smart devices and the whole connection starts to struggle.

First floor

Designed install First floor heatmap with access points correctly planned, showing strong green signal across nearly the whole property
A dedicated access point on each floor, positioned to cover every room evenly. A switch wires in the computer, TV, games console and CCTV directly, so the wireless side only carries what needs to be wireless.
Unplanned install First floor heatmap with a single access point in one corner, showing most of the property in weak yellow or red signal
The supplier's standard router, left where the incoming cable happens to land. It can't cover multiple floors, repeaters are unreliable at best, and bandwidth falls over once more than a handful of devices connect.

This is what our network design solves before a single cable is run. Instead of the supplier's router and a couple of unreliable repeaters, we plan a dedicated access point for each floor and a switch to wire in the devices that benefit most, like your TV, games console, desktop computer and CCTV, so the install matches the green map, not the red one.

Example Design

See exactly what your design looks like before we install anything.

Every job starts with a full coverage design for your property: floor-by-floor layout, WiFi coverage across every band and camera placement, all mapped out before a single device is fitted. Here's a real example from a property in Manchester.

Page 5 · Ground floor layout Page 3 · 5GHz WiFi coverage Example property designManchester · 10-page design sheet
Fully Designed & Installed

Build your own estimate

Tell us the shape of your property and what you need covered. We'll work out roughly how much hardware that takes and give you a price range, then you can send it through as an enquiry.

VP / N&S / 05

FloorsNumber of floors to cover
1
Total property size80 m²
20 m²All floors combined500 m²+
CCTV camerasEntrances, driveways, communal areas
2
Wired devicese.g. TV, games console, desktop PC
2

This estimate doesn't include running new cabling; it assumes usable cabling is already in place. If cables need terminating, tick the box above and we'll add an allowance. The final cost is confirmed once we've seen the property.

Common Questions

Networks & security, explained

What equipment do you install?

We design and install UniFi systems: WiFi access points, network switches, CCTV cameras and door access readers, all running on one platform so the whole system is managed in one place.

Why not just use the router from my internet provider?

A supplier's router is built to get you online, not to cover several floors and dozens of devices. It usually sits wherever the incoming cable lands, and the repeaters meant to fill the gaps are unreliable. A designed network puts an access point on each floor and wires in the devices that benefit most, so coverage stays strong everywhere.

Can I see the design before anything is installed?

Yes. Every job starts with a full coverage design for your property, covering the floor-by-floor layout, WiFi coverage and camera placement. The online estimate includes producing that design, and we confirm the exact quote for the works once it's complete.

Does the price include running new cables?

The online estimate assumes usable cabling is already in place, with an optional allowance if cables need terminating. If new cable runs are needed we'll confirm the cost after seeing the property. On a Ventra build or renovation, cabling is planned in alongside the rest of the works.

Can I watch my CCTV from my phone?

Yes. Cameras are recorded and reviewable from one app, so you can check entrances, driveways and communal areas wherever you are.

Do you work on HMOs and commercial sites as well as homes?

Yes. We install for homes, HMOs and small commercial sites. Door access control with fobs or app entry and an access log is particularly useful for shared and commercial buildings.

Request A Quote

Tell us what you need covered.

We'll talk through your property, design the system and confirm the exact quote before anything is installed.

  • UniFi WiFi, CCTV and door access
  • A full coverage design for your property
  • Supplied, installed and configured
  • Homes, HMOs and small commercial sites
Prefer to talk? 0161 564 6139

Reviews

What our clients say

Real feedback from homeowners and investors we've worked with across Manchester, pulled straight from Google, unedited.

Book a free consultation